GES-80-RDG Wire Mesh Conveyor

The flat belt conveyor GES-80-RDG is equipped with a round wire linked belt.

It is especially suitable for transporting extremely hot items. The patented adjusting mechanisms of the drive and reversing roller, enclosed from the outside and located in the inner part of the components, guarantees easy cleaning and low susceptance to failure. For this reason, it is especially suitable for food, pharmaceutical and chemical industries.

The GES-80-RDG, equipped with our standard linked belt made of stainless steel, is available in widths from 100 – 400 mm and can be delivered within 24 hours.

The stainless steel frame with a height of 80 mm is provided with holes with an interval of 30 mm and a diameter of 9 mm to mount accessories. You will find more information on available accessories under the column “Lot of Accessories”.

With a belt conveyor length of up to 1,500 mm and a width of up to 400 mm, the GES-80-RDG can be used with a stainless steel. H pillar stand.

Wider and longer designs of the GES-80-RDG are equipped with the required amount of steel double stands.
All stand systems are adjustable in height and equipped with a vertical position lock.

Technical Specifications and Accessories

Belt widths: 100, 200, 300 and 400 mm. Intermediate lengths are possible upon request.

Distance between axes / length: 750 to 6.000 mm. All intermediate lengths are possible.

Drive with constant belt speed:
v = approx. 6,1 / 11,4 / 17,1 / 22,8 / 34,2 or 48,8 m/min.
Other belt speeds are possible on request.
Connection for 220/240 – 380/415 V, 50 Hz. Protection type IP 65.
This drive can be supplied together with a motor protection switch incorporating an emergency
off. It has a 2 metre supply cable and CEE plug and is of protection type IP 65.

Drive with infinitely adjustable belt speed:
v = approx. 2,4-8,5 / 4,6-16,0 / 6,8-23,9 / 9,1-31,9 / 13,7-47,9 or 19,5-68,4 m/min.
Other belt speeds are possible on request.
The drive is supplied together with a frequency regulator that is ready to be plugged
to 230V 50 Hz and has a protection type of IP 65. The frequency controller incorporates a digital
motor protection switch.

Geared motor positions: Pulling at the side of the belt, on the left or right. The motor can be turned around its flange in steps of 90°.

Total belt load: Standard is of 70 kg. Higher loads are possible on request.