Visit
to View our Partner Brands
GES-50 Flat Belt Conveyor
The GES-50 has a frame made from a completely closed stainless steel profile. Hence it complies to even the strictest hygienic standards. With its frame height of 50mm it is well suited for conveying of lighter goods in pharmaceutical or chemical production as well as in food processing lines.
The GES-50 is another conveyor in our product line, that can be made within 24 hours.
Just as all GEPPERT-Band stainless steel conveyors, the GES-50 has all moving parts of the adjustment elements installed on the inside of the mechanism. The accumulation of any contamination is therefore effectively prevented.
For easy cleaning of the whole conveyor the deflecting roller can be flipped up to loosen the tension of the belt. This provides instant access for cleaning even under the belt.
On the photo on this page the GES-50 is shown with two double supports in stainless steel. They are infinitely adjustable in height and pivotable to allow use of the conveyor with a slight inclination. For longer versions of the model more supports have to be used.
Technical Specifications and Accessories
Belt widths:
100, 200, 300, 400, 500 and 600 mm.
Distance between axes / length:
500 to 6,000 mm. All intermediate lengths are possible.
Drive with constant belt speed:
v = approx. 4,0 / 7,3 / 11,0 / 14,7 / 22,0 or 31,4 m/min.
Other belt speeds upon request. Connection for 220/240 – 380/415 V, 50 Hz. Protection type IP 65. This drive can be supplied ready for connection with a motor protection switch with an emergency switch, and with a 2 meter supply cable and CEE plug. Protection type IP 65.
Drive with infinitely adjustable belt speed:
v = approx. 1,6-5,6 / 2,9-10,3 / 4,4-15,4 / 5,9-20,5 / 8,8-30,8 or 12,6-44,0 m/min.
Other belt speeds upon request. The drive is supplied together with a digital frequency regulator that is ready to be plugged to 240 V 50 Hz and has a protection type of IP 65. The frequency controller incorporates a digital motor protection switch.
Geared motor position:
The geared motor is positioned pulling at the side of the belt, left or right, and can be turned around its flange in steps of 90°.
Total belt load:
up to 30 kg possible. Higher belt loads can be handled on request.