EM-R-W Inclined Modular Belt Conveyor

The inclined belt conveyor EM-R-W is a particularly robust belt conveyor.

Its stainless steel frame with a height of 95 mm is manufactured with a closed stainless steel profile.

As a standard, the belt conveyor EM-R-W is equipped with a chain made of plastic modules with cross slats and co-running side plates. A hopper with a fall-back flap is mounted on the feed end.

The cross slats may be 1, 2 or 3 inches high and their distance on the conveyor between one another can be freely selected in 1-inch steps. The plastic modular chains of the EM-R-W have been approved by the FDA and are easy to clean. In addition, they are particularly hard-wearing and easy to service thanks to the possibility of replacing individual links. The feeding hopper is available in a small and a large standard design.

The two pivotable double supports made of stainless steel, which are displayed here together with the belt conveyor EM-R-W, are infinitely adjustable in height. For an optimal positioning the support on the feed end is equipped with small fixed rollers. The support on the discharge end is provided with two dead stop safety wheels. Alternatively, the EM-R-W can also be used with a mobile H-shaped single column support stand.

Technical Specifications and Accessories

Useable belt widths (between the side plates) / Total belt widths:
136/228 mm, 212/304 mm, 288/380 mm, 364/456 mm, 440/532 mm, or 516/608 mm.

Distance between axes / Length: 600 to 6.000 mm. All intermediate lengths are possible.

Drive unit with constant belt speed:
V = approx. 5,6 / 10,4 / 15,6 / 20,8 / 31,2 or 44,6 m/min.
Further belt speeds are available upon request.
Supply for 220/240 – 380/415 V, 50 Hz. Protection type IP 54.
This drive unit can be delivered ready to be connected including a protective motor switch with
an emergency stop and a power line of 2 meters length with a CEE plug. Protection type IP 65.

Drive unit with infinitely adjustable belt speed:
V = approx. 2,2-7,8 / 4,2-14,6 / 6,2-21,8 / 8,3-29,1 / 12,5-43,7 or 17,8-62,4 m/min.
Further belt speeds are available upon request.
The belt is delivered with a connected digital frequency controller, ready to be plugged in for
230 V, 50 Hz. Protection type IP 65.

Geared motor position: The geared motor can be placed pulling on the left or right side and
can be turned in single steps by 90°.

Total belt load: Standard load 50 kg. Higher loads are available upon request.

EM-R-W Operating Manual