2200/2700 Series Accessories

Adjustable Lane Guides

• 2200 Belted conveyors only
• UHMW guide surface on an anodized aluminum mounting rail
• Painted Steel mounting hardware
• Available in standard 1′ (305 mm) increments or can be ordered
  to any length
• Part height: 5” (127 mm) maximum, 0.25” (7 mm) minimum
• 0.25” (6mm) minimum lane width
• Package includes (1) lane guide, mounting hardware and adjusting knobs
• For conveyors up to 24″ (610 mm) wide – Consult factory for
  wider lane guide availability
• Compatible with standard Dorner bolt-on profiles
• Easily adjusts for quick product change over
• Attach additional guides to create multiple lanes
• Create lanes, plows, merges and transfers
• Order additional lane kits separately

Flared Side Guides

• 2200 Belted conveyors only
• Guides parts onto conveyor belt surface
• Includes metric mounting hardware

90° Adjustable Transfer Guides

• 2200 Belted conveyors only
• For conveyors up to 12” (305 mm) wide
• Requires low side conveyors
• 0.25” (6 mm) minimum part thickness, 0.88” (22 mm) minimum product size
• Hard coat anodized transfer plate
• Painted steel mounting hardware
• 48” (1,219 mm) long UHMW outside turn guide
• Maximum recommended part weight is 20 lbs (9 kg) at 50 ft/min (15 m/min) belt speed. Consult factory regarding applications for
• higher product weights or faster belt speeds.
• 0.88″ (22 mm) minimum product size for 2200 Series
• Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.
• Pre-engineered guided turns adjust to a variety of products
• Accepts standard Dorner bolt-on profiles outside of transfer area
• Place adjusting rods where required
• Easily adjusts for quick product change-over

Drive Accessories

Flexible Coupling A

• 12 mm bore x 0.38″ hex
• Includes SAE set screws

Flexible Coupling B

• 12 mm bore x 12 mm bore
• Includes metric set screws

T-Slot Accessories

Spring T-Nut

• Retains position in T-Slot

T-Bars

• Mounts in T-slots to attach heavy accessories

T-Slot Dust Cover

• Black plastic extrusion
• Snaps into conveyor and aluminum stand T-slots
• Can be trimmed to fit

T-Slot Extenders

• Provides additional T-slots to the end of the conveyor
• Includes mounting brackets and hardware
• Metric fasteners

Mounting Brackets

Adjustable Height Bracket

• Provides height adjustment
• (2) Height ranges
• Includes mounting hardware

Table Top Mounting Bracket

End Stops

Adjustable End Stops

• Slides up and down T-slot length
• Includes metric mounting hardware

Fixed End Stops

• Fixed at end of conveyors
• Anodized aluminum stop
• Includes tail plates and mounting hardware

Roller Conveyor End Stop

• For roller stop conveyors
• Includes metric mounting hardware

Pulley Transfer Plates

• 2200 Belted Conveyor Only
• Enables the transfer of product that is a 0.88” (22 mm) minimum.
• 300 series stainless steel transfer plate

Motion Control

In-Line Cord Emergency Stop Kit

• Push to stop/pull to start push button
• Plastic NEMA 12 enclosure
• 115V single phase
• 1/2 hp (0.37 kW) and smaller motors
• Includes power and outlet cords
• Mounting for 2200 and support stands
• Horizontal or vertical mount

Side Tables

• Provides a 6” (152 mm) or 12” (305 mm) wide working surface
• Adjusts in/out and up/down (0.25″ max above bedplate) for product transfer on/off conveyor belts
• Can be positioned anywhere along the conveyor
• Anodized aluminum work surface
• Max load: 5 lbs/ft (6 kg/m), use Adjustable Tie Brackets for added capacity
• Available in 1′ (305 mm) increments from 1′ (305 mm) to 99′ (30,175 mm)